


30mm Domestic Grids
IBRAN-X-30 is our 30mm octagonal ground reinforcement grid: the shallowest grid in the range and, cell for cell, the strongest. The octagonal geometry distributes load across eight faces instead of four, which is what lets a 30mm section carry the same 500 tons per square yard as grids half again its depth.
That matters most where dig depth is the constraint. On a driveway that has to meet an existing threshold, a path alongside a building, or a project where you are working to a fixed finished level, every 10mm of grid depth is 10mm of excavation and 10mm of spoil to remove. IBRAN-X-30 gives you the load capacity without the depth.
Where it works best
- Gravel driveways and parking. The octagonal cells hold angular stone tightly and stop the migration that turns loose gravel into ruts and bare patches.
- Paths and walkways. Filled level and blinded, it gives a firm, even surface that walks well and takes a wheelbarrow or a wheelchair.
- Shed, bin and hot tub bases. A free-draining, load-spreading base that goes down in an afternoon, with no concrete and nothing to mix.
- Shallow build-ups. Anywhere the finished level is fixed and you cannot afford the depth a deeper grid needs.
How it compares to the 40mm
Both carry 500 t/m2. The difference is depth and what follows from it. IBRAN-X-30 needs less excavation, less spoil removal and fits 25% more grids on a pallet, which brings the delivered cost per square yard down on any job of size.
The 40mm IBRAN-X is the better choice for reinforced grass, where the extra depth gives the root zone room to establish under traffic. For gravel surfaces, IBRAN-O is what we would specify.
Installation
Excavate to your sub-base depth plus 30mm plus a 5-10mm blinding. Lay a woven geotextile, then compacted MOT Type 1 in layers of no more than 75mm. Blind with grit sand, screed level, push-fit the grids together and fill the cells with angular 10-20mm gravel. Add no more than 10mm over the top: anything deeper is unconfined stone and will migrate. Full sequence in our installation guide.
No reviews yet, be the first to share your experience.
Write a review
| Cell depth | 30mm |
| Panel size | 500 x 500 x 30mm |
| Coverage | 4 grids per m² |
| Cell geometry | Octagonal |
| Load capacity | 500 tonnes per m² when filled |
| Material | 100% recycled polypropylene |
| Manufactured | United Kingdom, by IBRAN |
| Permeability | Fully permeable, suitable as a SuDS component |
| Temperature range | -50°C to +90°C |
| Accessibility | Part M compliant when gravel filled and blinded |
| Design life | 25 years, subject to documented installation |
| Recommended infill | Angular 10-20mm gravel, or rootzone for grass |
| Recommended sub-base | 50-80mm MOT Type 1 for cars, 150mm for heavier use |
Applications for this system
Real installations this product is specified for, with the build-up, quantities and installation sequence for each.
